| Type of bearing | Ball, Rolling element and plain bearings |
| Casing partition | Axially split |
| Drive frequency | 50 / 60 Hz |
| Type of drive | Electric motor / Diesel Engine |
| Drive voltage | Low Voltage, High voltage |
| No. of impeller entries | Double entry |
| Impeller material | Cast Iron Alloys, Steel Alloys, Bronze Alloys |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Oil lubrication |
| Max. permissible fluid temperature | 105 °C |
| Nozzle position | In-line |
| Maximum rated pressure (discharge) | PN 10, PN 16, PN 25 |
| Pump set location | Dry installed |
| Shaft material | Carbone Steel, Stainless Steel |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of Impeller | Closed, Radial |
| Type of connection | Flange |
| Casing material | Cast Iron, Ductile Cast Iron, Carbon Steel |
| Maximum Head | 200 m |
| Minimum Head | 7 m |
| Installation position | Horizontal or Vertical |
| Shaft seal type | Gland packing, Mechanical seal |
| Main applications | Industry and process Engineering, Building services, Water supply, Energy |
| Maximum discharge-side pressure | 25 bar |
| Maximum drive rating | 350 kW (and more on request) |
| Type of installation | |
| TMaximum flow rate | 3600 m³/h (and more on request) |
| Minimum flow rate | 90 m³/h |
| Maximum speed of rotation | 3500 1/min |
Usages:
- Pumping untreated and clean water, service water and seawater in waterworks
- Irrigation and drainage pumping stations
- Fire fighting Systems
- Shipbuilding
Değerlendirmeler
Clear filtersHenüz değerlendirme yapılmadı.