Telecom Shelters
The basic structure of the shelter consists of four main columns joined with four side walls.
The side walls are Argon-welded to the roof panel in the top, and to the floor panel in the bottom side.
In order to provide adjustable height for shelter installation, six adjustable base units each with four bolting holes are mounted under the floor panel, to be used for bolting the shelter to the ground.
Eight lifting hooks are also available on the top and bottom panels of the shelter to facilitate transport and installation process.
Ultimate security & safety measures have been integrated into the shelter design, providing it with a full anti-theft structure with at least 20 years of active lifespan.
₺0,00
Bugün teslimat
Ücret, rotaya bağlıdır
Kuryemiz belirtilen adrese teslim edecektir
2-3 Gün
Ücret, rotaya bağlıdır
DHL kurye belirtilen adrese teslimat yapacaktır.
4-5 Gün
Ücret, rotaya bağlıdır
1 yıl
5 Günlük
Description
Main side Walls
Main side walls are made of corrugated sandwich panels with pre-coted electrostatic painted galvanized sheets, blocking heat transfer, humidity and dust.
The insulating material used within the side walls consists of a 75-80mm layer of polyurethane, and the walls are covered with a 3mm MDF coating on the inner side.
The insulating material injection is performed using anti- flame polyurethane with 45Kg/m³ density.
A very low thermal transfer coefficient has led to a wide usage of polyurethane as an efficient thermal isolator.
Thanks to its building elements, polyurethane remains highly resistant against defects caused by sunlight, heat, electricity, fire, acids and other solvents.
In order to access the equipment room, a door with a similar structure as the side walls is located on the front wall, equipped with high quality security locks.
All the edges of the door opening have been properly sealed against rain, dust and thermal leakage with spring rubber-tapes.
İncelemeler
Clear filtersThere are no İncelemeler yet.