Pump type OH1-According to API 610
Usages:
- Oil and Gas
- Petrochemical
- Power Plant
Product features
Design:
- Single-casing, radially split between bearings
- Segmental ring section pumps with tie-rods
- Single suction Impeller
- Sealing between segments by O-rings
- Mechanical shaft seal with single, double or tandem seal
- No limitation for pressures, Spec. gravity and dimensions of casing
- Axial bearing necessary additionally to balancing device
₺0,00
0 People watching this product now!
Bugün teslimat
Ücret, rotaya bağlıdır
Kuryemiz belirtilen adrese teslim edecektir
2-3 Gün
Ücret, rotaya bağlıdır
DHL kurye belirtilen adrese teslimat yapacaktır.
4-5 Gün
Ücret, rotaya bağlıdır
1 yıl
5 Günlük
Description
Features:
- Optimized hydraulics for high efficiency
- Interchange ability of parts simplifies stock keeping
| Type of bearing | Ball, Rolling and plain bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor, Diesel Engine |
| Drive voltage | Low, Medium and high voltage |
| No. of impeller entries | Single entry |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Oil lubricant |
| Max. permissible fluid temperature | 200 °C |
| Min. permissible fluid temperature | -20 °C |
| Nozzle position | Side – Top ( other on request ) |
| Pump set location | Dry installed |
| Suction characteristics | Non-priming |
| Type of casing | Diffuser casing |
| Type of impeller | Closed, Radial |
| Type of connection | Flange |
| Maximum head | Up to 100 m per stage |
| Installation position | Horizontal |
| Shaft seal type | Gland packing, Mechanical seal |
| Main applications | Energy, Industry and process engineering, Mining |
| Casing material | Table H-1 of API610 |
| Maximum discharge-side pressure | 150 bar |
| Maximum drive rating | 1800 kW |
| Type of installation | Stationary |
| Maximum flow rate | 900 m³/h |
| Minimum flow rate | 10 m³/h |
| Maximum speed of rotation | 3500 1/min |
Usages:
Applications:
Pumping of:
- Pumping of different clean hydrocarbons
Exploitation:
- Refining plants
- Petrochemical plants
Operating ranges:
- Capacity: up to 900 m3/h
- Head: up to 2600 m
- Pressure: up to 270 bar
- Temperature: -20 to +210 0C
Advantages:
- Casing stiffness high
- Single casing
- Lower weight, compared with barrel execution casing
İncelemeler
Clear filtersThere are no İncelemeler yet.